YUSENDENT® Obturation pen C-Fill a Pack, short heating time,up to 150oc within 2s

YUSENDENT® Obturation pen C-Fill a Pack

Features

1. Simple design, body lightsome, comfortable, reduce your exhaustion after long time using

2. The needle type and temperature mode can be adjustable, make the gutta point more compact

3. Short heating time

4. Adopting gutta percha vertical condensation technology

5. Double batteries, convenient to replace, filling more timely

6. More efficient, more safe, more fast, more thorouth root canal filling system.

Technical Data

Power  adaptor: Input: 100-240Vac 50/60Hz, Output: DC 5V/1.5A

Li- ion battery: Voltage: DC3.7V  

Capacity: 2800 mAh

Temperatures  Operating: +10～+40C, Storage: -10 ~+55C 

Humidity  Operating: 30~75%RH, Storage: 20~85%RH

Atmospheric pressure Operating: 80~106kPa, Storage: 50~106kPa

Protection against electrical shock:Type  B

Net weight: 0.5kg

Gross weight: 0.75kg

Packing size: 200*155*65mm

Packing material: carton



Maintenance

1. Please clean and sterilize the pen tip before each treatment.

2. The remaining gutta percha can be cleaned by medical cotton swab.

3. Sterilization: High temperature and high pressure is recommended. Tips can be sterilized under high temperature and high pressure, please use the brush to clean it before sterilizing. The recommended temperature (121℃，20min or 134℃ 5min)

Storage and transportation

1. This equipment should be handled with care, and far away from the shock; and install or keep in the place where is try and cool.

2. Avoid being storage with the poisonous, corrosive, flammable, explosive products.

3. During the transportation, shock and impact should be avoided, and lift safety.

Operation notices

1.If the temperature is over 200 ℃, pressurization is not available as the gutta become very soft.

2.It would be better to make the gutta inside root canal cool down and short heating 1~2S, then you can take out the tip; in this case, it can avoid the tip that come with gutta.

Packing list

Obturation pen*1

Charging base*1

Adaptor*1

Batteries*2

Pen tips (4 pcs)

Wrench*1